Nott Ltd. Copperweld

August 2, 2010


Grounding wire

Nott now distributes Copperweld grounding wire. This wire has been used by the electric utility industry for many years and just now comes to broadcasting. Standard Copperweld wire is not annealed, making it very springy. However, the ground wire is annealed and handles just like pure copper wire. It can also be silver soldered like pure copper. Tests indicate erosion may occur at the ends of buried wires but will go no more than two wire diameters into the metal. In the case of #10 wire, this is less than 1/4". RF current travels only on the outer surface of a wire due to skin effect, so most of the current will be flowing in the copper skin. Bending it into a sharp radius does not cause the copper skin to crack. Wrap it as tightly as needed, then silver-solder it.
800-443-0966
ron@nottltd.com
www.nottltd.com


Do you have experience with this product? Share your comments below.


Comments