When it comes time to install a new on-air audio console, where will
you begin? Determining the number of source inputs and is only a small
part of the process. The audio console, which sits at the focal point
in any studio, serves a valuable function, but unlike audio source
equipment and peripherals, which can be easily upgraded and modified as
the station's needs change, the audio console is a long-term
Determing the basic needs and then specifying the piece of equipment
to fill these needs is not always a simple process. The on-air audio
consoles available today offer many choices and configurations. In
addition, the console itself is undergoing an evolution that changes
its function as a central routing point to an interface control point.
This new flexibility makes the selection process more involved as the
console becomes an integrated part of a facility's audio routing
The basic starting point is deciding on an analog or digital
console. Digital designs, once high-priced items practical only for
larger installations, have become affordable and rival the costs of
analog designs. In addition, many digital designs have moved beyond the
stand-alone equipment phase and become a part of the consolidated audio
networking system. We used to categorize audio consoles as analog or
digital, but now it makes more sense to categorize them as stand-alone
A console that functions on its own, without the need for a routing
system or audio engine qualifies as a stand-alone console. The
conventional analog design typifies this approach. All audio sources
are connected directly to the console, and the outputs of the console
are routed to their final destination. In smaller installations, this
approach is still practical. These systems are simpler to install and
usually simpler to maintain than integrated systems, primarily because
they can be isolated in their function.
All the analog designs and some digital designs fit into the
stand-alone category. The stand-alone approach will work well for
smaller, stand-alone stations that may only have one or two studios.
Stand-alone consoles may play a role in a larger system, however.
Integration of resources
The integrated console approach changes the function of the audio
console. Instead of serving as the central wiring and control point of
a studio, the console becomes a controller for a much larger system.
The console is no longer a mixer, but a control surface, which changes
the way that a facility is designed.
The integrated approach is generally more complicated to set up, but
offers a great deal of flexibility to future changes. By connecting all
the sources within a facility to a central audio network, sources can
be called on as needed without additional wiring. Frequently used
console configurations can be stored and recalled as a preset. The
number of output buses can also be changed dynamically, assigning
outputs as needed.
In reality, switching audio sources and destinations is just a small
advantage. With source switching usually comes the need to switch
control logic. Most current integrated designs allow for this. In
addition, special mix-minus feeds can be established so that when a
device is assigned to a console control, the necessary mix-minus
switching is also made.
The console usually presents the greatest challenge if it needs to
be replaced in a studio. The integrated approach removes this obstacle.
If a larger control surface is needed at a later time, the entire
studio does not need to be rewired. In most cases, the old control
surface can be unplugged and new one put in its place. Some additional
programming may be required.
The initial integrated designs required all the audio sources to be
connected to a central audio frame or engine. It makes no sense to
route the output of a CD player to the central rack room only to have
it assigned back to the studio where it is installed. Most, if not all,
integrated systems today provide remote source input frames. These
allow the sources within a studio to be connected to a module or
mini-engine within the studio. That mini-engine is then attached to the
audio network. These mini-engines are connected to the audio network
via CAT-5, fiber optic or some other high-capacity cable. In then end,
the overall cable requirements are greatly reduced by using an
integrated system. When several studios are involved, this can be a
significant savings in labor and cable.
Stand-alone consoles can be incorporated into integrated systems.
While the full advantages of logic and audio routing may not be
realized, the integrated design will provide an audio router to the
stand-alone studio. Most integrated systems offer controller units that
function like source and destination selectors.
As an added bonus, the integrated system can likely provide a
facility intercom as well. The studio mics are already in the audio
network; with a little additional programming, a momentary closure and
talkback output can provide a facility-wide intercom.
Integrated systems can be programmed and reprogrammed as a
facility's needs change. An important element to understand is the
method used to make these programming changes. Make sure you understand
the method and the philosophy behind a system's method before making
the final purchase decision. If the system is impossible to program,
its potential flexibility is worthless.
Logic control can be a confusing element. Switching the audio is the
easiest part. Learn how a system assigns and controls various logic
inputs and outputs to a single source. It's not always a one-to-one
Regardless of a system's design and flexibility, the console surface
itself is an important consideration. Evaluate the tactile feel of the
switch and faders. A control surface will still be treated like the
battleship-built consoles from years ago, so be sure that it will stand
up to the use (and occasional abuse) in a studio. Don't forget the
lesser elements such as indicator lamps and component replacement.
There are practical applications for stand-alone and integrated
router console designs. As you evaluate your station's needs, keep an
eye on the big picture and the potential for future growth. Be prepared
to change your approach once all the factors have been considered.
A sample of available on-air audio consoles
Systems Livewire conveys audio and peripheral data streams over
standard Ethernet hardware and cable, reducing the infrastructure
costs. A single CAT-5 or fiber conveys multiple audio channels,
control, program-associated-data, VoIP telephone and computer data. A
Livewire 100Base-T link can carry 50 bi-directional stereo channels of
48kHz, 24-bit linear PCM audio. Multiple audio terminals can be
distributed around the network to provide audio routing and control.
Mixing functions are controlled with the Smart Surface, a
console control surface that provides a familiar console controller for
adjusting levels and assigning inputs and outputs.
BMX Digital is an all-digital design that features 48 digital buses
that can be configured for program mixes and talkback channels. It has
four program buses, four utility buses and two send buses, each with
analog and digital outputs. It supports as many as six telco modules
with their own off-line mixes, with two additional off-line mixes for
other mix-minus uses. The meter assembly features stereo bargraph
meters, a digital clock and a timer. The modules are hot-swappable and
have alphanumeric displays for input labels. The console surface can
directly communicate with Vistamax audio network frames to
provide a comprehensive routing system.
Audioarts Engineering D-16 digital console features a compact
footprint and a built-in router that assigns any source to any input or
monitor. The D-16 controls 16 input channels and two caller phone
channels. It is equipped with digital bargraph metering, alpha source
displays, provides analog and digital stereo PGM and AUD, Mono 1 and 2
output buses in addition to four mix-minus outputs. Assignable machine
control ports are opto-isolated. The D-16's direct access to rear DB-25
I/O connectors facilitates easy countertop installation.
Communications manufactures the MX Series of analog
consoles, from the MX A Series with as few as four channels to the
fully loaded 18-channel MX18EW. The consoles are designed for small to
medium market use. Solid-steel frames build the foundation, and
reverse-screened Lexan overlays on the modules protect the labeling.
The modules are interchangeable and carry all of the channel
electronics; no active components are mounted on the console's
motherboard. Each module uses VCAs for noise-free operation. Consoles
are available with rotary or linear faders and feature active-balanced
line inputs, a cue amp with speaker, headphone output and remote module
Systems 12,000 series consoles are available in 8-, 18-and
28-channel mainframes. Featuring analog electronics for on-site service
and support, the modular channel strips have polycarbonate overlays to
protect the painted surfaces from wear. VCAs and dc on and off
switching eliminate scratchy faders or popping switches. Optional
modules include remote selectors and distribution amps. Optional input
modules add panning or stereo mode selection. The 12,000 supports a
master control room and two studios with monitor feeds, muting and
talkback. All input modules feature two active balanced inputs, output
assignments to program, audition and utility buses, stereo cue by fader
detent and control logic.
|Wheatstone's GEN-9 digital on-air control
surface adds a significant tool to the Wheatstone radio line as an
extension of the established Bridge digital audio network routing
system. The Bridge provides a practical and compact cost-saving
solution for new and growing studios with mixed audio standards. The
Bridge engine components allow up to 256 mix buses in one rack-mount
system. Multiple GEN-9 components can be linked to form a networked
system, making it useful for large station integration projects. The
GEN-9 system provides total integration of routing, machine logic and
Ward-Beck Systems R2K is available in three studio frame sizes
(12, 20 or 28 modules) and one rack-mount configuration (eight
modules). All connections are made with Phoenix connectors. The power
supply is housed in a Ward-Beck 8200 series rack-mount frame, which can
also host other 8200 accessory modules. The meter bridge sits low on
the console to permit a clear view. The console features a modular
design, a RS-422 serial port for turret or automation control, A/B
input selectors on all modules, four stereo program outputs, two
assignable mono mix buses, six telephone mix-minus feeds, and a timer
and clock that supports all time-code standards.
BC-2000 D accepts up to 2,048 inputs and provides up to 2,048
outputs. Multiple control surfaces can be connected to multiple engine
frames to tailor the size of the system. The routing engine handles all
the input and output routing as well as dynamics and equalization
controls. A studio configuration is built on a five-fader main module,
and additional faders can be added with five-fader or 10-fader
expansions. The audio network communicates via MADI, Ethernet and
RS-422. An LCD display shows current console-channel status.
Vadis D.C. II supports the decentralized Vadis 880 and
Vadis 220 audio/media network frames. The surface provides a
user-configurable modular digital audio console for live and production
broadcast applications with as many as 24 fader positions. Through the
audio network, the system accesses a variety of input and output cards
to route any source to any fader position. Multiple mix buses and
mix-minus feeds can be created. In addition, DSP audio frame modules
provide EQ and dynamics. Audio frames can be networked via fiber-optic
cable to reduce wiring needs.
|The Autogram Pacemaker IIk PM228
is a modular, table-top mount analog console. It can accept as many as
60 stereo inputs and four or eight microphones. The output complement
includes two stereo program outputs (program and audition), one
mix-minus output, one mono output, two monitor outputs, two headphone
outputs and a cue output with internal speaker. The console is also
available in a smaller frame as the Pacemaker IIk PM218. All indicator
lamps are LEDs. Modules can be replaced while powered without pops or
clicks. It features all electronic switching, P and G faders, four
lighted meters and an autoclock.
six, 12, 18 and 24 channel sizes, Radio Systems Millenium
consoles all feature three output buses, remote control and metering, a
comprehensive monitor section with standard eight-position selector and
a clock and timer. Models differ only in their channel count and number
of meters on the overbridge. The soft touch rubber keypads are
illuminated by LEDs and are rated for 1,000,000 operations. Audio is
controlled with VCAs and electronic switching. By keeping audio path
short, the console maintains a high RFI immunity. All input and output
audio wiring is via removable barrier strips. Each input module accepts
a mic or line-level source.
Audio Engine router functions as a full X-Y router, permitting
selection of any input to any output. A separate X-Y router controller
is also available. The Supervisor software, included with the Audio
Engine, provides the Matrix IP router controller, which offers complete
X-Y routing functions. The DSP cards can provide equalization and
dynamics processing, a 10-second talk show delay double dump feature
and pre-fader input meters with a compression indicator. Up to 24
mix-minus buses can be established. A slave fader was recently added,
which allows a fader to be slaved to another for use in split
advertising applications on two stations running the same
On Air 2000M2 series is a second-generation digital console with an
input configuration router. The M2 can be equipped with six, 12, 18 or
24 channel faders and with as many as 24 input modules. A maximum of 24
input modules and 64 input signals can be controlled by the router.
Each module can be analog or digital offering two or six inputs,
equipped with or without transformers and suitable for mic or line
levels. The modular design allows the self-contained desk components to
be arranged as desired with the I/O section separate from the surface.
The On Air series also includes the model 1000 and 5000 consoles.
DB-10 has a range of AES-3 and S/PDIF inputs and outputs, and it
supports 32kHz to 96kHz sampling. Inputs are controlled with the 10
input-channel faders. Channels five through 10 have an A/B input
switching function. The internal memory can store 99 snapshots, nine
projects (console settings) and 20 compressor presets. Snapshots and
projects can be saved and loaded to an external PC via RS-232. With the
password-protect function, certain items in the menu system are
accessible to only specified users. Pressing the EMG button connects
one mic and one line input to the program bus.
control surface, the Sierra Automated Systems Rubicon integrates
into the SAS 32KD digital audio network to control mixing, switching,
level control and effects. Completely modular, customizable and fully
programmable, the control surface is designed for a medium- or
large-market facility. Frame sizes can house from four to 40 modules.
Each module provides full router selection of all the sources on the
32KD. Each module has four program assign switches and four effects/aux
assign switches, but the actual number of assignable buses is
The Resource Guide provides a brief look at some of the products
available in the equipment category. While this is far from a complete
list, it should provide enough basic information to help you get