AES3 Passive Converters
Oct 11, 2001 12:00 PM
AES3 Passive Convertors
AES3 digital signals are being used more and more everyday. There are two versions of this standard. One is a balanced signal passed over a twisted-pair wire with a characteristic impedance of 110 ohms. Its complete name is AES3-1992. The other is an unbalanced signal passed over coaxial cable with a characteristic impedance of 75 ohms. This is called AES3-ID-1995. Both formats are commonly referenced without the last four digits, which indicate the year the standard was adopted.
Apart from the voltage level and ground reference, the formats are identical. The passive circuit below can be used to convert signals from one format to the other. Both circuits account for the difference in impedance. The balanced-to-unbalanced converter also reduced the voltage level. Because these are passive circuits, the unbalanced-to-balanced converter cannot increase the voltage level. This circuit is better suited to applications where a long signal path is needed and an amplifier can be placed at the receiving end.
A balanced signal must not only be unbalanced, but also reduced in level by 14dB. The circuit below has a load impedance of 112 ohms, a source impedance of 72 ohms, a return loss of >25dB, and an atenuation of 1:5 (14dB).