Hard to Reach Screw and Nut

Author:
Publish date:

Hard to Reach Screw and Nut

Sep 1, 2011 2:00 AM, By Doug Irwin, CPBE AMD DRB

Plenty of us have done transmitter repairs that involved a tube socket. Why does it always seem that there is that one screw/nut/washer combination that won't go back on? And it's the one you can't see? Likely the socket will be oriented so that the screw stays in place by gravity; but still you need to attach the nut (and perhaps a lock-washer as well) on the bottom of the socket. If you simply can't do it with the nut resting on your fingertip, just the smallest dab of silicon (same stuff used for heat sinks) to make the nut adhere enough until you find the screw. Some tipsters have suggested using Super Glue, but that's an extreme approach.

And while you're working over the blower, always put a piece of paper, cardboard or a towel over the airway (where the blower blows air up underneath the socket) to catch anything dropped, rather than it falling into the blower motor. Also, add an inspection mirror to your toolbox to help see around the back of that blower assembly and other tight spots.

We need your tips! Ideas submitted to Tech Tips may be suitable to earn SBE recertification credits.

Do you have a tech tip? Send it to us at radio@RadioMagOnline.com

Cure for Lost Headphones

Recycle an old vending machine to keep the jocks happy....

Stringing MP3s Together

No need for an editing program if you can get the command line in Windows....

Drying Electronics

A common restaurant trick might save your device....

Better than Velcro: Power Grip

Take a tip from the guitar players to keep things in place....

September 2011

Managing audio assets, inside KUNC, a preview of the 2011 Radio Show, Field Reports on the Avid Mbox Mini and Harris Oasis and more....

Related