Plug Before You Crimp

Author:
Publish date:

Plug Before You Crimp

Jun 1, 2010 12:00 PM, By Chriss Scherer

Tech Tips, June 2010

Image placeholder title

Installing RJ-45 connectors used to be a pain, especially with CAT-5e stranded cable. Those individual strands wanted to twist out of position more times than not. If you didn't notice until after you crimped the connector, you either had to cut the connector off and re-do, or, unfortunately, discover the trouble only after installing a run and having the connection fail.

Michael Bradford, CPBE, Broadcast/Audio Services, Jackson, MI, discovered the Platinum Tools EZ RJ-45 plugs some time ago during a studio installation at WHMI in Howell, MI. These plugs permit the individual strands to pass through the connector to confirm proper alignment before being crimped. Even if there's a twisty wires can be re-aligned and re-inserted properly before the crimp is made. No wasted connectors, no failed connections and the cable insulation can be tucked into the base of the connector for a secure fit. The Platinum crimping tool will also shear off the extended strands � or you can use your present crimping tool and cut off the excess with side-cutters.

We need your tips!

Ideas submitted to Tech Tips may be suitable to earn SBE recertification credits.

Do you have a tech tip? Send it to us at radio@RadioMagOnline.com

Taking Pictures

A digital camera can be a valuable tool in your toolbox. Even the camera on a cell phone is better than nothing, but higher resolution cameras can be helpful as well....

Cell phone remotes

This home-made interface splits the mini jack from the phone into an XLR connector for a mic and a headphone jack....

Wall-wart Plugs

The Furman PlugLock has metal brackets that are adjustable for various size wall-warts and allows them to be securely clamped in place....

Related