Reuse Console Button Caps

Author:
Publish date:

Reuse Console Button Caps

Sep 1, 2009 12:00 PM, By John Landry, CSRE

Tech Tips, Sep 2009

The routine grind

Image placeholder title

Here's a simple re-use tip for the plastic buttons on legacy audio equipment like the old Pacific Recorders consoles: Many of these were originally ordered with custom engraved legends on the OFF buttons. And because most of us no longer use much of the equipment referred to on those buttons we have stuck everything from Dymo and P-Touch labels to masking tape over them as new things were connected. It is very simple to remove the old legends using a Dremel tool with the 409 cut off wheel. This allows the colored plastic to remain intact. A new legend can be put on with a clear P-Touch label or using clear plastic transfers on a laser printer.

Landry is an audio maintenance engineer at CBS Radio/Westwood One, New York.

Image placeholder title

Ideas submitted to Tech Tips may be suitable to earn SBE recertification credits.

Do you have a tech tip? Send it to us at radio@RadioMagOnline.com

Sharpen Hand Tools for Longer Life

With the use of a fine needle file more life can be coaxed out of an old wire stripper....

Mounting Computers

While several methods of mounting various workstations and servers has been addressed before, sometimes a specific computer just won't fit on anything you have. A simple solution is as near as a suspended ceiling....

Related