Switch N Sense
Oct 1, 2009 12:00 PM, By John Landry, CSRE
Tech Tips, Oct 2009
Many automation systems utilize the Measurement Computing Systems Switch N Sense-8 USB converter box for cue closure inputs. The Switch N Sense is an instrumentation interface with differential isolated inputs designed to handle up to 500Vac or dc. Its use for broadcast automation requires an external power supply, which means another wall-wart to clutter up the dc strip or a 9V battery to be replaced regularly. However, the unit has a 5V regulator on the circuit board, and with the addition of two tack-soldered leads this can be made to provide the voltage to operate the inputs. Simply lift open the cover, and solder wires to both ends of capacitor C2. Connect the positive lead of the capacitor to switch and bring it back to the A sides of the inputs. Then connect the negative lead from C2 to the B sides of the inputs. If desired, a small picofuse can be added to the positive lead to protect the power supply.
Landry is an audio maintenance engineer at CBS Radio/Westwood One, New York.
We need your tips!
Ideas submitted to Tech Tips may be suitable to earn SBE recertification credits.
Do you have a tech tip? Send it to us atradio@RadioMagOnline.com
Wavosaur will multitask like the previous version of Adobe and is compatible with most older Windows operating systems....
When you must have more than one keyboard and mouse, one way to make things neater is to use a wireless keyboard/mouse combination....