Threaded mic adapters
Jul 1, 2009 12:00 PM, By Chriss Scherer, editor
Tech Tips, Jul 2009
Adapt and thrive
The last time you bought a microphone you may have found a threaded adapter inside the mic clip. Did you wonder what it was for? I was once told it was for European mic stands, although I never saw a mic stand in Europe with that smaller thread. What do you do with those threaded adapters? You probably tossed them in a box like I did, thinking they might come in handy sometime.
What is that adapter for anyway? Let's review some thread sizes. Standard mic mounts use a 5/8"-27 thread. The little adapters you have are 3/8"-16 inside. I thought this was an odd size until I recently learned something about camera mounts.
A typical still or consumer video camera has a threaded inset. These are commonly 1/4"-20 threads, but there is another common camera thread size: 3/8"-16.
This all came together for me when I was looking to devise a clamp to attach a portable recorder to a tall mic stand (the bottom section of this stand is about 2" across). I located a clamp for a lighting truss that would work well. I also noted that 3/8"-16 is also commonly used with lighting equipment.
The bolt on the lighting clamp was perfect for the mic thread insert. With another adapter, I can mount the recorder on the bracket, too.
Perhaps now you can find some uses for those 5/8"-27 male to 3/8"-16 female inserts.
Do you have a tech tip? Send it to us atradio@RadioMagOnline.com
When an item can be used for more than application, it has a greater value....