Analog testing

Publish date:

Analog testing

Jun 1, 2010 12:00 PM, By Chriss Scherer

Tech Tips, July 2010

Image placeholder title

Ed Treese is a contract engineer based in Kansas City. While his work includes plenty of digital signals, he still encounters plenty of analog equipment in his work. He shared some notes on his favorite piece of analog test equipment: a pair of headphones.

He keeps a pair of Sennheiser HD414 high-impedance headphones in his toolkit. The original version of these headphones had an impedance around 2k ohms. Most headphones available today are 50 ohms or less. Because of the high impedance, Treese can tap them into an active audio circuit with little or no effect to the audio path.

Image placeholder title

Treese also keeps a few adapters handy to simplify connections. He has a stereo headphone jack that is monoed to alligator clips. He also keeps a TAC clip on hand to slip on two rows of 66 punch blocks. He also carries an XLR through connector with a stereo headphone jack (again monoed) all in parallel. The XLRs can be used individually or in-line with the audio circuit.

We need your tips!

Ideas submitted to Tech Tips may be suitable to earn SBE recertification credits.

Do you have a tech tip? Send it to us at

Unusual Parts Source: Outdoors Store

By looking in some unusual places you might find better and less expensive alternatives to tools or parts. One possible source is a camping or outdoor store....