Field Report: APT WorldCast Systems Horizon NextGen

Publish date:

Field Report: APT WorldCast Systems Horizon NextGen

May 1, 2013 4:32 PM, By Larry Holtz

We all know the satisfying feeling of solving a tough issue with equipment that truly works as advertized. Such is our experience at All Classical Public Media, Portland, OR, with the APT WorldCast Systems Horizon NextGen audio codec units.

Image placeholder title

The APT WorldCast Horizon NextGen with SureStream technology is a big name for the first system to provide seamless audio throughput in the presence of Internet congestion and dropouts by using two or more separate Internet circuits. We recently installed two units on a problematic public Internet link and put them through their paces. All Classical operates a small group of 100 percent simulcast FM stations and translators that require a modest-cost approach to delivering uninterrupted studio-to-transmitter program links over extended distances. Many of us in the industry have experienced only partial success with audio codecs over the open Internet, even when backing them up with redundant units, additional Internet connections and silence-sensing failover systems.

The Horizon NextGen supports multiple Internet connections with two physical Ethernet ports, and as long as at least one of the connections is receiving UDP packets from the studio, audio flows without interruption. We connect ours to separate Internet circuits, one a cable provider and the other is a DSL.

No more missed packets

SureStream allows two or more redundant streams to be sent over separate routes or networks. All streams and packets get special tagging for the decoder. At the far end the decoder inspects and synchronizes the multiple streams' latency. The decoder chooses and decodes the best packet from each stream to produce a seamless audio output. Packets may arrive out of order or be missing entirely, but as long as there is one good packet from at least one stream, all is good in the audio delivery. There are no audio drops from failover relays, glitches or other anomalies, as the SureStream decoder works its magic, choosing UDP packet by packet from the available streams.

Performance at a glance � � � Multiple encoding algorithms
� Web GUI management
� Surestream uses redundant streams to eliminate audio dropouts
� Opto in and relay out for remote control
� Alarm detection for streams and networks�

In STL applications where long latency is tolerable, the NextGen supports up to five seconds of buffering to provide higher immunity to packet loss. For remote broadcasts, the user can greatly shorten the latency while still enjoying the superior dropout immunity of two streams.

In the event that all streams are lost as the result of network congestion or physical cable disconnections, the NextGen recovers very quickly, typically within a few seconds. We also found that the unit operates quite well over a unidirectional IP link, such as a one-way microwave link with UDP.


The unit ships with Enhanced apt-X linear PCM algorithms. Select audio bandwidths from 3.8 to 22.5kHz in stereo and 7.6 to 22.5kHz in mono. Choose 16- or 24-bit depth.

Image placeholder title

In our station's application, Enhanced apt-X provided a good combination of high audio quality and within the modest 1.5MB/s bandwidth provided by our cable and DSL Internet services. The NextGen SureStream technology allows freedom to choose a higher stream bandwidth, because occasional dropped packets from network congestion do not create audio dropouts. Transports can be Unicast, Multiple Unicast and Multicast. Multiple Unicast and Multicast can reduce cost for multiple destinations by requiring only one encoding unit. The Horizon NextGen is also available in the lower cost IP Decoder (only) model.

- continued on page 2

1 2 Next

Field Report: APT WorldCast Systems Horizon NextGen

May 1, 2013 4:32 PM, By Larry Holtz

Setup and management

The codec comes with WorldCast's Network Management System (NMS) software, which is the Windows-platform proprietary GUI system present in many of WorldCast's products. The NextGen has the added convenience of an embedded Web GUI, giving the user two ways to access the unit. Either works well, with the NMS additionally displaying a one-screen family tree of all connected codecs and computers. Multiple configurations of streams, destinations and algorithms can be saved and recalled from a profile list. The Web GUI and the NMS software configure network addresses, audio codecs, stream destinations as well as the SureStream redundant stream setup.

The redundant Ethernet interfaces afford ultimate accessibility for troubleshooting or network maintenance. If a problem occurs on a redundant link, the user can access the unit via the one working link.

Alarms and remote control

The NextGen includes alarm indicators and contact closures for audio silence detection, IP transmit and receive errors, and physical Ethernet disconnections. The audio silence detection alarm offers a user configurable level threshold from -3dBFS to -42dBFS and a timeout period of a few seconds to 2.5 hours. If a gap occurs in the audio stream due to dropped packets, a sync failure alarm displays. The alarms are available as relay contact outputs on the rear panel of the unit and viewable through the built-in Web GUI and NMS software.

The unit provides a basic wired GPIO remote control system. The Web GUI controls four relays at the far end unit. The user may configure four opto-coupler inputs to monitor status of external equipment. An AUX data RS-232 port is available to send and receive serial data, such as RBDS/RDS or HD text.


The front panel contains a headphone monitor jack with input/output selector switch, left and right bar graph LED audio level indicators, and Alarm, Connected and Power LED indicators. The rear panel hosts the RJ-45 Ethernet jacks, XLR AES3 digital audio input and output and AES3 reference clock input, XLR analog balanced left and right audio in and out, DB15 alarm relay outputs, and DB15 for status opto-coupler inputs. The DB9 AUX Data port may be used for transmitting RBDS/RDS, HD Radio PAD or other serial traffic.

Worldcast Systems � � 305-249-3110

The unit supports the Scripteasy control software, and can actually control and monitor other equipment using the SNMP protocol. Firmware may be updated via Ethernet and Internet.

Holtz is vice president of technology for All Classical Public Media, Portland, OR.

WorldCast Systems APT Worldcast Horizon NextGen

IP audio codec and 2013 Pick Hit Award Winner...

May 2013

WKSU designs to handle noise, wireless site connectivity, Field Reports from Deva and Worldcast APT, 20 years of Radio magazine and some NAB review....

Previous 1 2