Radial Engineering ProMS2

Publish date:

Radial Engineering ProMS2

Oct 18, 2013 1:00 AM, By Erin Shipps, senior associate editor

Image placeholder title

Single-channel mic splitter
The RadialProMS2 is completely passive and 100 percent discrete. The engine inside is an Eclipse ET-MS10 transformer that is linear from 20Hz to 20kHz while exhibiting less than 0.01 percent distortion at 20Hz. The Eclipse transformer is equipped with a mu-metal can that shields the sensitive circuit from outside electro-magnetic fields. The microphone input features a 30dB pad to enable extra high-level sources to be used without fear of saturating the transformer. There are three outputs: The first is a direct-coupled output normally connected to the main FOH PA system mixer and provides a return path for 48V phantom should a condenser mic or active DI box be in use. The second is a transformer-isolated output particularly adept at eliminating the hum and buzz caused by ground loops. The third is a direct output with a ground lift switch. This auxiliary output can be used to feed the stage monitors, recording system or remote broadcast truck.

Do you have experience with this product? Share your comments below.

Radial Engineering USB-Pro

High-resolution stereo direct box...

Radial Engineering StageBug SB-1

Direct box...