Dielectric Amplifies RF Filter Portfolio for Over-The-Air Broadcasters

New tunable waveguide and cross-coupling innovations reduce configuration times, improve power handling through the filtering process
Author:
Publish date:

RAYMOND, Maine���April 14, 2017���Dielectric, a pioneer in purpose-engineered antennas and RF systems for TV and radio broadcasters,�will show new innovations for RF filtering inside�TV and FM radio�transmission�facilities�at the 2017 NAB Show, taking place April 24-27 at the Las Vegas Convention Center (Booth C2613).

For TV systems, Dielectric will unveil a�60 kW�tunable�waveguide�filter�design that�delivers a boost in efficiency and voltage�handling capability�for�the Spectrum�Repack,�and�future ATSC 3.0 applications.�

�Tunable filters have been around for some time, but there has been a goal in the broadcast community to increase their power handling capabilities,� said Derek Small,�senior�engineer, Dielectric. �In the past, liquid cooling�has been used to improve filter power ratings.�Dielectric�s�tunable�waveguide design is an industry first,�in part because�it generates a�minimal amount of heat.�We�re achieving higher air-cooled power levels than anything available today�that is�liquid-cooled.�

Small adds that using a high-power air-cooled filter has no bearing on the�broadcaster�s choice�of�transmitter.�Since most high-power TV�transmitters are liquid-cooled,�Dielectric�s tunable waveguide air-cooled filter will reduce�operational�costs inside the plant.���Using a liquid-cooled filter means pulling liquid from the transmitter,� he said. �That liquid is used to cool�the�transmitter, and in essence you rob the transmitter of an important cooling source.�In some cases,�a separate cooling system�may be required, which presents an additional capital expense and maintenance.�Our system simplifies the cooling requirements�and reduces the complexity of the installation.��

While the waveguide innovation is impressive, the �tunable� aspect remains significant � especially at a time when most broadcasters are�concentrating on�the Spectrum Repack.�The tunable design simplifies the overall architecture, reducing size and accelerating installation. The��one-size-fits-all��design�approach for any broadcaster on a UHF channel results in quicker manufacturing and�delivery.�Once installed, the design effortlessly adapts to environmental changes such as temperature and humidity, ensuring harsh conditions do not adversely affect channel tuning as signals move through the RF filtering process.

�Our customers retain the efficiency of traditional dual-mode cavities�with�our�tunable waveguide�design,� said Keith Pelletier, vice president and general manager, Dielectric. �The�compact�design�is�easy to install and returns�real estate to the RF plant. These are very important benefits as our customers move to new channel assignments during the Repack, and looking forward, the�higher�voltage handling capability of waveguide is an ideal benefit for ATSC 3.0 systems.�

Cross-Coupling Innovations for Radio

For FM broadcasters,�Dielectric�continues to�lower�their�initial and operational costs by reducing�the amount of parts required to filter two or more channels. At the 2016 NAB Show, Dielectric introduced a new field-tunable, FM two-channel�manifold�combiner that eliminated coaxial Tee junctions,�line and elbows, effectively reducing footprint and returning space to the broadcaster.

This year Dielectric has evolved this design by adding�unique cross couplings�to its manifold filter design, effectively�allowing less frequency separation for combined channels.� Since fewer cavities are used, efficiency is improved and operational costs�are reduced.

�Higher-order filters�have been required for channel combiners and IM reduction due to the crowded�FM spectrum,and�have�a tendency to reduce efficiency,� said Small.���Higher order filters with large amplitude roll-off and delay canadd asynchronous AM,�and�reduce stereo separation�in the FM signal.�From a classic design standpoint, the use of constant impedance FM combiners means twice�as many filters and components and�raise both initial and�operational�costs. Our new cross-coupled designs tackle these problems�with�much less complex architecture in shared FM facilities.�

About Dielectric

Based in Raymond, Maine,�Dielectric LLC�is a wholly owned subsidiary of Sinclair. Dielectric is a leading provider of innovative broadcast products. From remote stations to major markets, Dielectric has been delivering solutions for every need since 1942. Dielectric is an innovative, customer-centric organization with a long history of engineering excellence in designing and manufacturing high-quality broadcast solutions. The Company is a trusted partner of broadcasters worldwide. More information can be accessed at�www.dielectric.com

Related